接著跟557號視頻看：就收到貨之后，出現這種情況怎么辦呢？

其實這種情況你說重做這個概率是不高的，新做的和兩年前做的高度不一致了。

它其他方面都沒什么問題，造成高低其實有很多種情況，比如說在廠里，我們自己工廠的地不平，我們就算哪怕組裝好了，我們下面都有一個黑色的調節腳的，就是一個螺鈕，就是你高低稍微調節一下，因為那個腳釘在最底下稍微調節一下是看不出來，不影響美觀的，所以我們都會配這種腳給客戶，我們工廠的地，然后和他商場的地，門店的地，包括店里鋪木地板，鋪地毯，軟地毯這種高低都會不一致，然后我們?yōu)榱俗尮衽_臺面平整的，都會配那種黑色的調節腳給客戶。

這樣師傅在安裝的時候，就把它調到一樣的高度，這樣就比較好，這個就是經驗。但是呢，這2節這個差的實在太多了，2公分，那個調節腳只能調節1公分。2公分，那怎么辦呢？我們只能做一個不銹鋼內套（視頻里可以看到） 。

2公分呢，下面這個調節腳就可以根據現場情況來調，也是最快解決的一個方法，我們一定不會逃避自己的責任了，都以最快最有效的方法給客戶解決。要是真的不行，該重做還是得給客戶重做，但是呢，這個腳放在最底下呢，然后它下面又是地毯，確實發到店里組裝起來高度就一致了，也看不到底部。

Continuing from the 557th video: What should you do when you encounter this issue after receiving the shipment?

Actually, the probability of redoing it is quite low. The newly made product might not match the one made two years ago.

There's nothing wrong with other aspects, and there are various reasons for the height difference. For example, in the factory, our workshop floor may not be level. Even if we assemble it perfectly, we have a black adjustable foot, which is a knob. You can slightly adjust the height as the foot is at the bottom and hardly noticeable, not affecting the aesthetics. Therefore, we always provide such feet to our customers. The floor condition of our factory, shopping malls, stores, including wooden floors, carpets, and soft carpets, can all cause inconsistencies in height. To ensure the countertop is level, we provide customers with those black adjustable feet.

When the technician installs it, they adjust it to the same height, which is a good approach. This is based on experience. However, in this case, the height difference is too significant, reaching 2 centimeters, while the adjustable foot can only adjust 1 centimeter. What should we do then? We can only make a stainless steel inner sleeve (visible in the video).

With this 2-centimeter sleeve, the adjustable foot can be adjusted according to the site conditions, which is the fastest solution. We will never evade our responsibilities and always strive to provide the fastest and most effective solutions to our customers. If it's really unavoidable, we will redo it for the customer. However, as the foot is placed at the bottom and covered by the carpet, once assembled in the store, the height will be consistent, and the bottom won't be visible.

我是展柜大小姐章婭妮，來自東莞鑫峰展柜廠，30年來我們廠只做類似于卡地亞珠寶這樣的奢侈品展柜和道具。

100多個國內外品牌授權我們廠制作展柜和道具，雖然我們貴一點，但是品質堪比卡地亞。

既能做鐘表、珠寶、博物館等展柜，又能做陳列道具的工廠，這樣的工廠，在國內沒有第二家。

我已經用自己的姓名“章婭妮”注冊了展柜品牌，這代表了我此生不轉行。

做了不稱心的展柜，應該來鑫峰廠試試。

手機/微信：17688026138

聯系人：章婭妮

地址：中國廣東省東莞市企石鎮永發工業區環企大道42號之一

I am Ms. Zhang Yani, from Dongguan Xinfeng Showcase Factory. For 30 years, our factory has only made luxury showcase and props similar to Cartier jewelry.

More than 100 domestic and foreign brands authorize our factory to make display cases and props, although we are a little more expensive, but the quality is comparable to Cartier.

Both can do watches, jewelry, museums and other display cases, but also can do display props factory, such a factory, there is no second in the country.

I have registered the showcase brand with my own name "Zhang Yani", which means that I will not change my career in this life.

Do not satisfactory display case, should come to Xinfeng factory to try.

Tel/wechat: 17688026138

Contact: Zhang Yani

Add: No. 42 Huanqi Road, Yongfa Industrial Zone, Qishi Town, Dongguan City, Guangdong Province，China.